Datalogic AV7000 - Diagnostics | Log Viewer (Decoder)

AV7000 LINEAR CAMERA REFERENCE MANUAL
196
4
4.7.9 Diagnostics | Log Viewer (Decoder)
Use the Log Viewer (Decoder) window to view encoder/tachometer and trigger event
information.
To access the Log Viewer (Decoder) window:
1. In the menu tree under Diagnostics, click Log Viewer (Decoder). The Log Viewer
(Decoder) window opens.
2. Click Connect to view logged data from the decoder.
3. Click Disconnect to pause the data stream.
0.
NOTE: Click Reset to re-enable Verbose Mode
logging.