AV7000 LINEAR CAMERA REFERENCE MANUAL
5.10 SETTING UP WEBSENTINEL PLUS IN THE AV7000
IMPORTANT: Set the parameters in the order they appear in this
documentation.
Update the settings in e-Genius (see chapter 4) as shown in the following procedure:
1. In the menu tree under Modify Settings, navigate to Global Settings | Image Saving |
Destination Settings. The Destination Settings window opens.
2. Set up the Destination Settings options as shown below.
3. Click Update to save the changes.
4. In the menu tree under Modify Settings, navigate to Global Settings | Image Saving |
Image Settings. The Image Settings window opens.
To Next Page
Loading...
