To Next Page

To Previous Page

E-GENIUS

169

4.6.2 Modify Settings | Device Settings | <Camera Name> | Mounting

Use the Mounting window when installing and calibrating the camera.

To view the Mounting window:

1. In the menu tree under Modify Settings, navigate to Device Settings | <Camera Name>

| Mounting. The Mounting window opens.

2. View the following barcode reader information:

Field Name

Definition

Camera Orientation

Mounting

Position

Select Top, Left, Right, or Bottom from the drop-down list depending on where the

camera is mounted.

This parameter allows defining the installation position of the camera in multi-

camera tunnel installations according to the code reading on the conveyor: Top,

Right, Left, etc. This parameter acts on the software reading algorithms and on the

position and height sensors configuration.

Mirroring

Select Disable or Enable from the drop-down list.

This parameter (when enabled) allows inverting or mirroring the image sent by the

camera. This function is used to set the object movement with respect to the

camera mounting position (i.e. camera position = Top Back). It is used to change a

reversed (mirrored) image to proper orientation for OCR applications or video

coding.

Left/Right

Offset (Y)

Enter the camera offset from the Y-axis. 0 = centered on Y. This defines the center

of the cropped image.

Automatic Calibration Parameters

Datalogic AV7000 Reference Manual

Other manuals for Datalogic AV7000