Name: Datalogic AV7000
Brand: Datalogic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

AV7000 LINEAR CAMERA REFERENCE MANUAL

2.4.2 Physical Support Requirements

For details on the weight of the barcode readers, see Chapter 8, Technical Features.

Multiple-head systems may include further details on the physical support requirements with

any application-specific documentation provided.

2.4.3 Vibration Limitations

See Chapter 8, Technical Features.

2.4.4 General Mounting Guidelines

It is important that you follow these general precautions when installing, setting up, operating,

maintaining, troubleshooting, or replacing any Datalogic products, parts or related

equipment.

As you plan and install your AV7000 camera imaging system application, be sure to keep the

following guidelines in mind:

 Follow application drawings for structural details and barcode reader placement.

 Determine the proper orientation and position of the barcode reader(s).

 Leave adequate clearances (approximately 300 mm [12 in]) for wiring.

 The first camera in the system must be installed at least 254 mm [10 in] upstream from

the focus device (DM3610, RangeFinder, or light curtain) to work properly.

 Route wires carefully to reduce or minimize electrical noise. When power and

communication wiring must cross, make their intersection perpendicular. Avoiding sharp

wire bends or loops, which can affect performance.

 Proper grounding limits the effects of noise due to Electromagnetic Interference (EMI).

2.4.5 Mounting Structure Considerations

Your first task is to mount your AV7000 camera. You can provide your own mounting

structure or Datalogic can design one for you. We recommend using a Datalogic mounting

structure for standard applications.

Your mounting structure must provide the following capabilities:

 It is adjustable enough for you to move your unit to the optimum position for proper

scanning.

 It allows a technician access to the barcode reader while it is mounted.

 It must be as vibration free as possible so as not to affect the scanning accuracy.

 It is constructed of steel or aluminum.

Datalogic AV7000 Reference Manual

Other manuals for Datalogic AV7000