To Next Page

To Previous Page

AV7000 LINEAR CAMERA REFERENCE MANUAL

236

5.3 AV7000 CAMERA SETUP AND CALIBRATION

The AV7000 Camera can be set up as a single unit or with multiple AV7000s in a scanning

array (tunnel). The AV7000 camera system is a high-precision imaging system, and requires

careful and accurate setup and calibration to function at its full potential.

Prerequisites

To successfully install, set up, and calibrate you camera system, the following is required:

 Application Drawing (for structure, camera, mirror, sensor and focusing device

positioning, and Far Working Distance for focusing)

 Application Specifications

 Laptop PC

 Tape Measure

 Sync Ethernet Cable Adapter

 Installation Kit (Test Boxes)

 CH-3 Autofocus Test Chart

 Dynamic Focus Target

 Picket Fence/Step Ladder Test Chart

 RangerOScope (software): Download from e-Genius, Utilities | Download Tools

window. Click RangeFinder Tools (Only when using RangeFinder for focusing).

 CodeWord Viewer: Download from e-Genius, Utilities | Download Tools window. Click

RangeFinder Tools (Only when using RangeFinder for focusing).

 Inventory All Equipment and Structure Parts

Review Mounting Drawing and Application Specifications

Make sure all equipment is mounted correctly based on the application drawings and

specifications.

 DM3610 (if applicable)

If the system uses a DM3610 Dimensioner for camera focus, review the DM3610

Dimensioner Reference Manual for installation and calibration of the DM3610. Install the

DM3610 as specified in the application drawing. See section 0.

 RangeFinder (if applicable)

If the system uses a RangeFinder for camera focus, install and calibrate the RangeFinder

according to application drawings and section 5.2.2.

 LCC-75xx Kit with DS2 Light Array

If the system uses a DS2 Light Array (Light Curtain) for camera focus, install the LCC-

75xx Kit according to application drawings and section 5.2.3.

 AV7000 Deflection Mirror Alignment

Reference the application drawing and section 2.5 for deflection mirror placement and

mounting.

Datalogic AV7000 Reference Manual

Other manuals for Datalogic AV7000