Delta DVP-15MC Series User Manual

DVP-15MC Series Motion Controller Operation Manual
1-2
_1
Thank you for purchasing DVP-15MC series motion controller which is created on the basis of motion control
and we are providing you with a high-end motion control system.
This manual describes the product specifications, functions, system architecture, installation, wiring, execution
principle, logic instructions and motion control instructions, trouble-shooting, communication protocols, homing
modes and other relevant information.
Make sure that you have well known about the motion control system configuration and product operation
before using DVP-15MC series motion controller.
1.1 Explanation of Symbols in This Manual
 Precautions before operation
Before operation, please read relevant safety instructions carefully so as to prevent an injury to personnel and
damage to products.
! Danger
It indi
cates the highly potential hazards. It is possible to cause a severe injury or even
fatal harm to personnel if you do not follow the instructions.
! Warning
I
t indicates the potential hazards. It is possible to cause a minor injury or even fatal
harm to personnel if you do not follow the instructions.
! Caution
It indicates much attention should be paid. An unexpected result may occur if you
do not follow the instructions.

Delta DVP-15MC Series Specifications

General

Brand	Delta
Model	DVP-15MC Series
Category	Controller
Language	English