Delta DVP-15MC Series User Manual

Chapter 8 Logic Instructions
8-177
8_
FB/FC
Explanation
Applicable model
FC
Times, dates_TO_*** instructions convert Time or date data into the data of
basic data types. “***” can be any basic data type.
DVP15MC11T
DVP15MC11T-06
 Parameters
Parameter
name
Meaning Input/ Output Description Valid range
In Data to convert Input Data to convert
Depends on the data type of the
variable that the input parameter is
connected to.
Out Conversion result Output Conversion result
Depends on the data type of the
variable that the output parameter is
connected to.
Boolean
Bit string Integer
Real
number
Time, date
String
BOOL
BYTE WORD DWORD LWORD
USINT
UINT
UDINT
ULINT SINT INT DINT LINT REAL
LREAL
TIME
DATE
TOD
DT
STRING
In
● ● ● ●
Out
The data type of Out must be the same as “***” of the instruction name.
Note:
The symbol ● indicates that the parameter is allowed to connect to the variable or constant of the data
type.
 Function Explanation
 Time and Date to Bool, Bit String, Integer, Real Number and String
The rule for the conversion of the time and date into the bool, bit string, integer, real number and
string is the same as that for the conversion of the unsigned integer into bool, bit string, integer, real
number and string. Refer to section 8.13.5 for details.
 Time and Date to Time and Date
 The time and date data can be converted to each other. And some instructions are shown
below.
The rule for the conversion of the time and date data into the time and date data is the same
as that for the conversion of unsigned integers into unsigned integers. The units must be
uniform during the conversion. The unit of TIME is ns (nanosecond) and the unit of others is
Times dates_TO_***,
EN ENO
Out
In
TIME_TO_DATE
EN ENO
Out
In
DATE_TO_TIME
EN ENO
Out
In
TIME_TO_TOD
EN ENO
Out
In
TOD_TO_DT
EN ENO
Out
In

Delta DVP-15MC Series Specifications

General

Brand	Delta
Model	DVP-15MC Series
Category	Controller
Language	English