Delta DVP-15MC Series User Manual

DVP-15MC Series Motion Controller Operation Manual
8-176
_8
 Real Number to Real Number
 Real numbers can be converted to real numbers. And some instructions are shown below.
 Real Number to Time or Date
 Real numbers can be converted to times or dates. And some instructions are shown below.
For the real number-to-time or date conversion, the real number is converted to the integer
first and then the integer is converted to the time or date. For relevant contents, refer to the
real number-to- integer conversion and integer-to-time or date conversion.
 Real Number to String
 Real numbers can be converted to strings. And some instructions are shown below.
The rule for the real number-to-string conversion is the same as that for the integer-to-string
conversion. Refer to section 8.13.3 for details.
 Precautions for Correct Use
The input variable is not allowed to omit. An error will occur during the compiling of the software if the
input variable is omitted. But the output variable is allowed to omit.
REAL_TO_LREAL
EN ENO
Out
In
LREAL_TO_REAL
EN ENO
Out
In
REAL_TO_TIME
EN ENO
Out
In
REAL _TO_DATE
ENO
Out
EN
In
LREAL_TO_TOD
EN ENO
Out
In
LREAL_TO_DT
EN ENO
Out
In
REAL _TO_STRING
EN ENO
Out
In
LREAL_TO_STRING
EN ENO
Out
In

Delta DVP-15MC Series Specifications

General

Brand	Delta
Model	DVP-15MC Series
Category	Controller
Language	English