DVP-15MC Series Motion Controller Operation Manual
8-336
Output Update Timing
Name Timing for changing to TRUE Timing for changing to FALSE
Done
When the instruction execution
succeeds.
When Error changes to TRUE.
When Enable changes to FALSE.
Error
When an error occurs in the
instruction execution or the
parameters for the instruction are
When the error is cleared.
Functions
CANopen_State is used for the diagnosis of the state of CANopen port (Only the CANopen port built in the
motion controller can use the instruction.) It can tell the state of CANopen port and if any slave is offline.
To Next Page
Loading...
Need help?
General
