DVP-15MC Series Motion Controller Operation Manual
6-8
Source Mode
Under Source mode, the simplified model is illustrated below and the current flows into the common
ports S0 and S1.
00
S0
Motion Controller
Sourcing
24VDC
10
S1
Motion Controller
Sourcing
24VDC
Figure 6.2.2.4
See the wiring circuit below.
The input points of the motion controller, 00~07 correspond to S0 as shown below.
Motion Controller
00 Input( )
Switch
S0 Common( )
24VDC
Figure 6.2.2.5
The input points of the motion controller, 10~17 correspond to S1 as shown below.
Motion Controller
10 Input( )
Switch
S1 Common( )
24VDC
Figure 6.2.2.6