Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 79 –
Passive Interface 705
Add Stops RIP broadcast and multicast messages from being sent on
specified network interfaces
705
Show Shows the configured passive interfaces 705
Neighbor Address 706
Add Configures the router to directly exchange routing
information with a static neighbor
706
Show Shows adjacent hosts or interfaces configured as a neighboring router 706
Redistribute 707
Add Imports external routing information from other routing domains (that
is, protocols) into the autonomous system
707
Show Shows the external routing information to be imported from other
routing domains
707
Distance 709
Add Defines an administrative distance for external routes learned from
other routing protocols
709
Show Shows the administrative distances assigned to external routes learned
from other routing protocols
709
Interface 710
Add Configures RIP parameters for each interface, including send and
receive versions, authentication, and method of loopback prevention
710
Show Shows the RIP parameters set for each interface 710
Modify Modifies RIP parameters for an interface 710
Statistics
Show Interface Information Shows RIP settings, and statistics on RIP protocol messages 714
Show Peer Information Displays information on neighboring RIP routers 715
Reset Statistics Clears statistics for RIP protocol messages 715
OSPF Open Shortest Path First (Version 2) 716
Network Area 717
Add Defines OSPF area address, area ID, and process ID 717
Show Shows configured areas 717
Show Process Show configured processes 717
System 720
Configure Configures the Router ID, global settings, and default information 720
Show Shows LSA statistics, administrative status, ABR/ASBR, area count, and
version number
723
Table 4: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General