Chapter 12
| Security Measures
IPv6 Source Guard
– 378 –
■
ND – Dynamic Neighbor Discovery binding, stateless address.
■
STA – Static IPv6 Source Guard binding.
Web Interface
To configure static bindings for IPv6 Source Guard:
1. Click Security, IPv6 Source Guard, Static Configuration.
2. Select Add from the Action list.
3. Enter the required bindings for each port.
4. Click Apply
Figure 230: Configuring Static Bindings for IPv6 Source Guard
To display static bindings for Iv6 Source Guard:
1. Click Security, IPv6 Source Guard, Static Configuration.
2. Select Show from the Action list.
Figure 231: Displaying Static Bindings for IPv6 Source Guard
To Next Page
Loading...
