Chapter 12
| Security Measures
ARP Inspection
– 347 –
Displaying
ARP Inspection
Statistics
Use the Security > ARP Inspection (Show Information - Show Statistics) page to
display statistics about the number of ARP packets processed, or dropped for
various reasons.
Parameters
These parameters are displayed:
Web Interface
To display statistics for ARP Inspection:
1. Click Security, ARP Inspection.
2. Select Show Information from the Step list.
3. Select Show Statistics from the Action list.
Table 19: ARP Inspection Statistics
Parameter Description
Received ARP packets before
ARP inspection rate limit
Count of ARP packets received but not exceeding the ARP
Inspection rate limit.
Dropped ARP packets in the
process of ARP inspection rate
limit
Count of ARP packets exceeding (and dropped by) ARP rate
limiting.
ARP packets dropped by
additional validation (IP)
Count of ARP packets that failed the IP address test.
ARP packets dropped by
additional validation (Dst-MAC)
Count of packets that failed the destination MAC address test.
Total ARP packets processed by
ARP inspection
Count of all ARP packets processed by the ARP Inspection engine.
ARP packets dropped by
additional validation (Src-MAC)
Count of packets that failed the source MAC address test.
ARP packets dropped by ARP
ACLs
Count of ARP packets that failed validation against ARP ACL rules.
ARP packets dropped by DHCP
snooping
Count of packets that failed validation against the DHCP Snooping
Binding database.
To Next Page
Loading...
Need help?
General