Edge-Core ECS4620-28F - Mst Configuration

Chapter 19 | Spanning Tree Commands
– 541 –
.
.
This example shows a brief summary of global and interface setting for the
spanning tree.
Console#show spanning-tree brief
Spanning Tree Mode : RSTP
Spanning Tree Enabled/Disabled : Enabled
Designated Root : 32768.0000E8944000
Current Root Port (Eth) : 1/24
Current Root Cost : 10000
Interface Pri Designated Designated Oper STP Role State Oper
Bridge ID Port ID Cost Status Edge
--------- --- --------------------- ---------- -------- ------ ---- ----- ---
Eth 1/ 1 128 32768.0000E89382A0 128.1 100000 EN DESG FWD No
Eth 1/ 2 128 32768.0000E89382A0 128.2 10000 EN DISB BLK No
Eth 1/ 3 128 32768.0000E89382A0 128.3 10000 EN DISB BLK No
Eth 1/ 4 128 32768.0000E89382A0 128.4 10000 EN DISB BLK No
Eth 1/ 5 128 32768.0000E89382A0 128.5 10000 EN DISB BLK No
.
.
.
show spanning-tree
mst configuration
This command shows the configuration of the multiple spanning tree.
Command Mode
Privileged Exec
Example
Console#show spanning-tree mst configuration
Mstp Configuration Information
--------------------------------------------------------------
Configuration Name : R&D
Revision Level :0
Instance VLANs
--------------------------------------------------------------
0 1-4094
Console#
show spanning-tree
tc-prop
This command shows the configuration of topology change propagation domains.
Syntax
show spanning-tree tc-prop [group group-id]
group-id - Group identifier. (Range: 1-255)
Command Mode
Privileged Exec