Chapter 31
| VRRP Commands
– 954 –
show vrrp interface This command displays status information for the specified VRRP interface.
Syntax
show vrrp interface vlan vlan-id [brief]
vlan-id - Identifier of configured VLAN interface. (Range: 1-4094)
brief - Displays summary information for all VRRP groups on this router.
Defaults
None
Command Mode
Privileged Exec
Example
This example displays the full listing of status information for VLAN 1.
Console#show vrrp interface vlan 1
Vlan 1 - Group 1,
State Master
Virtual IP Address 192.168.1.6
Virtual MAC Address 00-00-5E-00-01-01
Advertisement Interval 5 sec
Preemption Enabled
Min Delay 10 sec
Priority 1
Authentication SimpleText
Authentication Key bluebird
Master Router 192.168.1.6
Master Priority 1
Master Advertisement Interval 5 sec
Master Down Interval 15
Console#
* Refer to the show vrrp command for a description of the display items.
show vrrp interface
counters
This command displays counters for VRRP protocol events and errors that have
occurred for the specified group and interface.
show vrrp group interface vlan interface counters
group - Identifies a VRRP group. (Range: 1-255)
interface - Identifier of configured VLAN interface. (Range: 1-4094)
Defaults
None
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General