Chapter 12
| Security Measures
AAA (Authentication, Authorization and Accounting)
– 283 –
◆ Sequence at Priority - Specifies the server and sequence to use for the group.
(Range: 1-5 for RADIUS; 1 for TACACS)
When specifying the priority sequence for a sever, the server index must
already be defined (see “Configuring Local/Remote Logon Authentication” on
page 279).
Web Interface
To configure the parameters for RADIUS or TACACS+ authentication:
1. Click Security, AAA, Server.
2. Select Configure Server from the Step list.
3. Select RADIUS or TACACS+ server type.
4. Select Global to specify the parameters that apply globally to all specified
servers, or select a specific Server Index to specify the parameters that apply to
a specific server.
5. To set or modify the authentication key, mark the Set Key box, enter the key,
and then confirm it
6. Click Apply.
Figure 160: Configuring Remote Authentication Server (RADIUS)
To Next Page
Loading...
