EMC Connectrix DS-32M2 User Manual

7
7-16
Connectrix DS-32M2 User Guide
Using Maintenance Features
Figure 7-5 Iomega QuikSync Dialog Box
2. To enable QuikSync, select On and click OK.
QuikSync Settings Do not change the default settings for automatic backup of the
EfcData directory. If you feel that QuikSync is not functioning
properly, check the settings using the following steps:
1. Open the QuikSync dialog box using one of these steps:
• From the Windows taskbar, click Start, Programs, Iomega
QuikSync, QuikSync.
• Double-click the QuikSync icon in the Windows status area,
located on the right side of the taskbar.
• Right-click the QuikSync icon and click Settings on the
pop-up menu.
2. Verify that the dialog box is configured exactly as it appears in
Figure 7-5.
The d:\EfcData\ directory is a mirror of c:\EfcData\. Do not change
this location in the Source field.
3. Click the Advanced tab to display the dialog box in Figure 7-6.

EMC Connectrix DS-32M2 Specifications

General

Brand	EMC
Model	Connectrix DS-32M2
Category	Switch
Language	English