EMC Connectrix DS-32M2 - Page 264

D
D-16 Connectrix DS-32M2 User Guide
Command Line Interface
config.features.show
Syntax show
Purpose This command shows the product feature information configured for
this switch.
Parameters This command has no parameters.
Command Example
Root> config features show
Output The product feature data is displayed as a table that includes the
following property.
Output Example The output from the config.ip.show command appears as follows.
Features: Open Systems Management Server
8 Flex Ports
config.ip.ethernet
Syntax ethernet ipAddress gatewayAddress subnetMask
Purpose This command sets the Ethernet network settings.
Description
The Telnet connection can be lost when these Ethernet network settings are
changed.
If the IP address is reconfigured, your Telnet client must be reconnected to
the new IP address. A new login will be requested.
Features The list of feature supported for the feature key.