EMC Connectrix DS-32M2 User Manual

D
D-26 Connectrix DS-32M2 User Guide
Command Line Interface
config.security.userRights.show
Syntax show
Purpose This command shows the user rights for the CLI access levels.
Parameters This command has no parameters.
Command Example
Root> config security userRights show
Output The user rights configuration data is displayed as a table, as shown in
the following example.
Output Example
config.snmp.addCommunity
Syntax addCommunity commIndex "commName" writeAuthorization
trapRecipient udpPortNum
Purpose This command adds an SNMP community to the SNMP
configuration.
Operator Username: Operator
Operator Password: **************
Administrator Username: Administrator
Administrator Password: ***************

EMC Connectrix DS-32M2 Specifications

General

Brand	EMC
Model	Connectrix DS-32M2
Category	Switch
Language	English