D
CLI OverviewThe config Branch
D-35
Command Line Interface
◆ BB Credit — The maximum number of outstanding frames that
can be transmitted without causing a buffer overrun condition at
the receiver.
◆ R_A_TOV — Resource Allocation Time Out Value (in tenths of a
second).
◆ E_D_TOV — Error Detect Time Out Value (in tenths of a second).
◆ Preferred Domain Id — The preferred domain ID of the switch.
◆ Switch Priority — Principal, Default, or Never Principal.
◆ Speed — Data rate set on the switch.
◆ Rerouting Delay — A delay that ensures that frames are
delivered in order through the fabric to their destination. Values
are Enabled or Disabled.
◆ Interop Mode — Interoperability mode for the switch.
Output Example The output from config.switch.show command appears as in the
following example:
config.system.contact
Syntax contact “systemContact”
Purpose This command sets the system contact attribute.
Parameters This command has one parameter.
Command Example
Root> config system contact “Joe”
BB Credit:
R_A_TOV:
E_D_TOV:
Preferred Domain Id:
Switch Priority:
Speed:
Rerouting Delay:
Interop Mode:
2
20
4
1
Principal
2 Gb/sec
Enabled
Open Fabric 1.0
systemContact
Specifies the new system contact string for the
switch. The contact can contain up to 255
characters.