D
CLI OverviewThe config Branch
D-39
Command Line Interface
config.zoning.activateZoneSet
Syntax activateZoneSet
Purpose This command activates the zone set contained in the work area to
the fabric and takes effect immediately.
Description This command takes effect immediately in the fabric.
Parameters This command has no parameters.
Command Example
Root> config zoning activateZoneSet
config.zoning.deactivateZoneSet
Syntax deactivateZoneSet
Purpose This command places all attached devices in the default zone and
takes effect immediately fabric wide.
Description This command takes effect immediately in the fabric.
The default zone must be activated independently of this command.
Parameters This command has no parameters.
Command Example
Root> config zoning deactiveZoneSet
config.zoning.replaceZoneSet
Syntax replaceZoneSet
Purpose This command replaces the work area with the active zone set that is
currently loaded on the fabric.
Parameters This command has no parameters.
Command Example
Root> config zoning replaceZoneSet
To Next Page
Loading...