EMC Connectrix DS-32M2 - Page 296

D
D-48 Connectrix DS-32M2 User Guide
Command Line Interface
state (that is, after failing a loopback test), the reset restores the port to
an operational state. The reset also clears all statistics counters and
disables port beaconing for the specified port.
Parameters This command has one parameter.
Command Example
Root> maint port reset 4
maint.system.beacon
Syntax beacon beaconState
Purpose This command enables or disables unit beaconing.
Parameters This command has one parameter.
Command Examples
Root> maint system beacon false
Root> maint system beacon 0
maint.system.clearSysError
Syntax clearSysError
Purpose This command clears the system error light.
Parameters This command has no parameters.
Command Example
Root> maint system clearSysError
portNumber
Specifies the port number to be reset. Valid
values for the DS-32M2 are 0 through 31.
beaconState
Specifies whether unit beaconing is enabled.
Valid values are true and false. Boolean 1 or 0
may be substituted as values.