EMC Connectrix DS-32M2 User Manual

D
CLI Overviewmaint
D-49
Command Line Interface
maint.system.ipl
Syntax ipl
Purpose This command IPLs the switch.
Description Connection to the CLI is lost when this command runs.
Parameters This command has no parameters.
Command Example
Root> maint system ipl
maint.system.resetConfig
Syntax resetConfig
Purpose This command resets all NV-RAM configuration parameters
(including feature keys and IP addresses) to their default values.
Description This command IPLs the switch. Connection from the command line
interface to the switch is lost when this command runs.
This command resets all configuration data and non-volatile settings,
including network information, to their default values (factory settings).
Management access may be lost until the network information is restored.
The default values are set in the firmware of the switch.
Parameters This command has no parameters.
Command Example
Root> maint system resetConfig
maint.system.setOnlineState
Syntax setOnlineState onlineState
Purpose This command sets the switch on line or off line.

EMC Connectrix DS-32M2 Specifications

General

Brand	EMC
Model	Connectrix DS-32M2
Category	Switch
Language	English