D
perfshow
D-61
Command Line Interface
show.nameServer
Syntax nameServer
Purpose This command displays information from the name server database
for devices attached to this switch.
Parameters This command has no parameters.
Command Example
Root> show nameServer
Output The device information data is displayed as a table that includes the
following properties.
◆ Type — N, NL, F/NL, F, FL, E, B.
◆ Port Id — The 24-bit Fibre Channel address.
◆ Port Name — The Port World Wide Name of the attached device.
◆ Node Name — The Node World Wide Name of the attached
device.
◆ COS — The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2; 2,3).
◆ FC4 Types — The FC4 types registered for this device. The
numbers in this field correspond to the list at the bottom of the
table.
To Next Page
Loading...