D
D-60 Connectrix DS-32M2 User Guide
Command Line Interface
show.loginServer
Syntax loginServer
Purpose This command displays information from the login server database
for devices attached to this switch.
Parameters This command has no parameters.
Command Example
Root> show loginServer
Output The device information is displayed as a table that includes the
following properties.
◆ Port — The port number where the device is attached.
◆ BB Crdt — The maximum number of remaining frames that can
be transmitted without causing a buffer overrun condition at the
receiver.
◆ RxFldSz — The buffer-to-buffer receive data field size from the
FLOGI received from the attached N_Port.
◆ COS — The class of service (for example, 1; 2; 4; 5; 6; F; 1,2; 2,3).
◆ Port Name — The Port World Wide Name of the attached device.
◆ Node Name — The Node World Wide Name of the attached
device.
Output Example The output from show.loginServer is similar to the following:
Port BB Crdt RxFldSz COS Port Name Node Name
---- ------- ------- --- ----------------------- -----------------------
0 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
1 10 2 00:11:22:33:44:55:00:78 20:11:22:33:44:55:66:78
4 10 2,3 00:11:22:33:44:55:00:79 20:11:22:33:44:55:66:79
7 10 2,3 00:11:22:33:44:55:00:80 20:11:22:33:44:55:66:80
8 10 2 00:11:22:33:44:55:00:81 20:11:22:33:44:55:66:81
10 10 2,3 00:11:22:33:44:55:00:82 20:11:22:33:44:55:66:82
11 10 2,3 00:11:22:33:44:55:00:83 20:11:22:33:44:55:66:83
12 10 3 00:11:22:33:44:55:00:84 20:11:22:33:44:55:66:84
13 10 2,3 00:11:22:33:44:55:00:85 20:11:22:33:44:55:66:85
15 10 2,3 00:11:22:33:44:55:00:86 20:11:22:33:44:55:66:86
To Next Page
Loading...
