D
D-64 Connectrix DS-32M2 User Guide
Command Line Interface
show.port.info
Syntax info
Purpose This command displays port information for all ports.
Parameters This command has no parameters.
Command Example
Root> show port info
Output The port information data is displayed as a table that includes the
following properties.
◆ Port — The port number.
◆ WWN — The World Wide Name of the port.
◆ OpSpeed — The current operating speed (1Gb/sec, 2Gb/sec, or
Not Established).
◆ SpeedCap — The current transceiver capability speed (1 Gb/sec
or 2 Gb/sec).
Output Example The output from show.port.info is similar to the following:
Port WWN OpSpeed SpeedCap
---- ----------------------- -------- --------
0 10:00:80:00:11:22:33:44 1 Gb/sec 2 Gb/sec
1 10:00:80:01:11:22:33:44 1 Gb/sec 2 Gb/sec
2 10:00:80:02:11:22:33:44 1 Gb/sec 2 Gb/sec
3 10:00:80:03:11:22:33:44 1 Gb/sec 2 Gb/sec
4 10:00:80:04:11:22:33:44 2 Gb/sec 2 Gb/sec
5 10:00:80:05:11:22:33:44 2 Gb/sec 2 Gb/sec
6 10:00:80:06:11:22:33:44 2 Gb/sec 2 Gb/sec
7 10:00:80:07:11:22:33:44 2 Gb/sec 2 Gb/sec
8 10:00:80:08:11:22:33:44 2 Gb/sec 2 Gb/sec
9 10:00:80:09:11:22:33:44 2 Gb/sec 2 Gb/sec
10 10:00:80:10:11:22:33:44 1 Gb/sec 2 Gb/sec
11 10:00:80:11:11:22:33:44 1 Gb/sec 2 Gb/sec
12 10:00:80:12:11:22:33:44 1 Gb/sec 2 Gb/sec
13 10:00:80:13:11:22:33:44 1 Gb/sec 2 Gb/sec
14 10:00:80:14:11:22:33:44 1 Gb/sec 2 Gb/sec
15 10:00:80:15:11:22:33:44 1 Gb/sec 2 Gb/sec
To Next Page
Loading...