D
perfshow
D-65
Command Line Interface
show.port.status
Syntax status
Purpose This command displays port status for all ports.
Parameters This command has no parameters.
Command Example
Root> show port status
Output The port status data is displayed as a table that includes the following
properties.
◆ Port — The port number.
◆ State — The port state; for example:
• Segmented E_Port
• Invalid Attachment
• Not Installed
• Online
• Offline
• Not Operational
• No Light
• Te sti n g
• Port Failure
• Link Reset
◆ Type — The operational port type:
• If the configured port type is F_Port or E_Port, this value will
match the configured type.
• If the configured type is G_Port, this value can be E_Port,
F_Port, or G_Port, depending on what is connected to the
port.
◆ Attached WWN — The World Wide Name of the device or switch
attached to the port, if one is attached.
◆ Beaconing — The beaconing state for the port (true or false).
◆ Reason — An optional message number that indicates if the port
has a segmented ISL or if a port binding violation has occurred.
The message description for this message number is provided at
the bottom of the table.
To Next Page
Loading...