EMC Connectrix DS-32M2 - Page 62

3
3-14
Connectrix DS-32M2 User Guide
Product Manager Overview
• SNMP Agent — Allows you to configure network addresses
and community names for up to six SNMP trap recipients.
Refer to Configuring the SNMP Agent on page 5-24.
• Management Server — Allows you to configure the open
systems inband management program to function with the
switch. (The Open Systems Management Server feature must
be installed in order to perform this procedure.)
Refer to Configuring Management Server Control on page 5-27.
• Features — Allows you to validate an installed feature for use.
Refer to Configuring the Feature Key on page 5-28.
• Date/Time — Allows you to set the date and time on the
switch, and to set the switch to synchronize with the date and
time on the Connectrix service processor.
Refer to Configuring the Date and Time on page 5-31.
• Threshold Alerts — Allows you to configure threshold alerts
for ports. A threshold alert notifies users when the transmit
(Tx) or receive (Rx) throughput reaches specified values for
specific director ports or port types (E_Ports or F_Ports).
Refer to Configuring Threshold Alerts on page 5-33.
• Export Configuration Report — Allows you to save an ASCII
text file containing all current user-definable configuration
options in a printable format.
Refer to Exporting a Configuration Report on page 5-41.
• Enable Web Server — Allows you to to enable the Embedded
Web Server interface on the switch.
Refer to Enabling the Embedded Web Server on page 5-43.
• Enable Telnet — Allows you to enable Telnet access to the
switch.
Refer to Enabling Telnet on page 5-44.
◆ Logs:
• Audit Log — Provides a record of all configuration changes
made on the switch. Refer to Audit Log on page 6-4.
• Event Log — Provides a record of significant events that have
occurred on the director, such as hardware failures, degraded
operation, and port problems. Refer to Event Log on page 6-6.