FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
4-46
Resolving the Ribbon wrinkle problems (continued)
Step Procedure
3 Adjust the Ribbon Tension. See the Using the Ribbon Tension Option
procedure under Using the Printer Calibration Utility
.
a. Select Menu from the LCD.
b. Select Setup Printer, then Print Settings, and then Ribbon Tension.
c. Adjust the current value to a more positive number.
4 Check the Printhead for debris and burrs.
To Next Page
Loading...
