FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-48
Using the Encoding Mode option (continued)
Step Procedure
1 Select the ISO Standard Encoding Module with a dual-coercivity (high or low)
encoding head. (Note: By default, the Printer Driver is set to encode
according to ISO standards onto high-coercivity Magnetic Stripes.)
OR
Select the JIS II Standard Encoding Module commonly used in Japan. Select
the JIS II mode to encode only Track 2.
(Note #1: The JIS II option provides encoding compatibility with the JIS C
6220 Type II cards commonly used in Japan. No encoding customization
options are available with the JIS II mode.)
(Note #2: A JIS II Magnetic Head must be installed in the Printer to use any
of the JIS II options in the Driver.)
To Next Page
Loading...
