FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
7-46
Upgrading the Main Firmware (DTC550 only) (continued)
Step Procedure
8 Select the Browse button. See Display A below.
9 Navigate to and select the appropriate file to upload.
10 Select the Upgrade button to start the Firmware upload. See Display A below.
11 Select Reboot when requested. See Display B below.
Display A – Selecting the Browse and Upgrade buttons.
Display B – Continuing to reboot
To Next Page
Loading...
