Fargo DTC550 - Page 359

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
8-11
Cleaning the Platen and Card Feed Rollers (continued)
Step Procedure
8 Open the Printer's Top Cover and Print Station. (Note: You do not need to
remove the blank cards, the Print Ribbon or the Card Cleaning Cartridge from
the Printer for this procedure.)
9 Remove the Print Ribbon.
10 Locate the Platen Roller.
11 Use a Cleaning Pad from the Printer Cleaning Kit to wipe the roller clean.
Press the FWD and REV buttons to move the Platen Roller back and forth
while cleaning.
12 After the Platen Roller is clean and completely dry, replace the printing
supplies and close the Printer.