Fargo DTC550 - Page 370

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
11-4
Print Test Image
Setup Printer
YMCK Card Test
YMC Color Bars
Magnetic Test
Standard Resin
YMC Gray Card
YMC Blue Card
Printer Settings
Current Value X
-25 min +25 max
Current Value X
-50 min +50 max
Current Value X
-50 min +50 max
Current Value X
-99 min +99 min
Current Value X
-99 min +99 min
Current Value X
-99 min +99 min
Print Settings
Image Darkness
Print Left of Form
Ribbon Tension
Print End of Form
Print Top of Form
Lam Settings
Print Settings
MENU
Yes / NoResin on Back
Yes / NoLamination
Current Value X
-25 min
+25 min
Resin Heat
White Level
Current Value X
0 min 25 max
Head Resistance
Current Value X
2400 min 3600 max
Ribbon Pre Tension
Lam Temp
Lam TOF
Lam EOF
Lam Flip Offset
Lam Invert Offset
Sensor Manual
Sensor Automatic
+25 max
Current Value X
-25 min
+99 max
-99 min +99 max
-99 min +99 max
Current Value X
Current Value X
Current Value X
-99 min +99 max
Current Value X
-25 min +25 max
Current Value X
+25 max
Current Value X
Gray/ Align YMC
Encoder Settings
Magnetics
E-Card Docks
None / Yes
None / Yes
None / Yes
None / Yes
None / Yes
None / Yes
Flipper Settings
Hopper Settings
Card Sensor
Brightness
Print Flip Level
Exception Feed
Encoder Flip Angle
Print Flip Angle
On / Off
Current Value X
-25 min +25 max
On / Off
-5 min +5 max
Current Value X
Current Value X
-25 min +25 max
Current Value X
-25 min +25 max
-99 min
-25 min
Mag Verify
On / Off
LCD Settings
-5 min +5 max
Current Value X
Contrast
Contact
HID Prox
ICLass
Mi f a r e
Magnetic TOF