4 Machine Status
116
Machine Status
4
z
Inbound Fax Spam List
You can check the settings for the G3-ID (telephone numbers) for which fax
reception is restricted.
z
Domain Filter List
You can check the settings configured for the domain which filters data
transmissions.
z
VoIP Gateway List
You can check the registration for VoIP gateways.
îš„Address Book
You can check the settings for the address numbers (speed dial), fax group recipients,
and relay stations.
When you specify a range of address numbers, the lists of settings for the specified
address numbers and relay stations are printed. Each page contains the settings
information on 50 address numbers.
For information on how to register speed dial and fax group recipients, refer to "Add Address Book
Entry" (P.265) and "Create Fax Group Recipients" (P.272).
Selecting [Address Book] displays the screen for specifying a range of address
numbers. Select a range of numbers, and then press the <Start> button.
z
Fax Group Recipients
You can print the list of settings for Fax
Group Recipients.
z
Select All
You can print the lists of settings for all address numbers, fax group recipients, and
relay stations.
îš„Fax Comments List
You can check the registered comments to use on fax cover sheets.
îš„Billing Data List
You can check the registration status of the billing data.
Note • [Billing Data List] is displayed when [Fax/Internet Fax Service] is set to [Enable Accounting]
under [Accounting] > [Accounting Type] > [Local Accounting] > [Auditron Mode].
Selecting [Billing Data List] displays the screen for specifying a range of address
numbers. Select a range of numbers, and then press the <Start> button.
z
Select All
You can print the list of all billing data.
To Next Page
Loading...
Need help?
General
