7 Printer Environment Settings
300
Printer Environment Settings
7
Print Overview
This machine can be set up as a local printer by directly connecting the machine to a
computer using a USB interface cable. Similarly, it can be set up as a network printer
by connecting the machine to a network.
Enable the necessary port using the control panel or CentreWare Internet Services.
Note • The print drivers are contained in the Driver CD Kit. For information on the driver installation
procedures, refer to the manual contained in the Driver CD Kit.
• You can download the latest print driver from our web site.
Using the Machine as a Local Printer
îš„USB
Use a USB interface cable to directly connect the machine to a computer.
For more information on how to set up the machine using USB connection, refer to "Installation When
Using USB Port" (P.303).
Using the Machine as a Network Printer
To set up the machine as a network printer, the following protocols are available to
connect the machine.
îš„LPD
Use LPD when direct communication between the machine and a computer via TCP/
IP is available.
For more information on how to set up the machine using LPD, refer to "Installation When Using TCP/
IP (LPD/Port 9100)" (P.305).
îš„NetWare
The machine supports the PServer mode using Netware directory service and bindery
service. The PServer mode enables the machine to function as a printer server, and to
retrieve print jobs in the print queue to output. The printer created for the machine
consumes one user license of the file server.
Note • The machine does not support Remote Printer (RPrinter) mode.
Via Internet
IPP
Local connection
USB
Network connection
LPD/ SMB/ Port9100/ EtherTalk
Network connection
NetWare/ Windows shared printer
Server
To Next Page
Loading...
Need help?
General
