Configuring Machine Settings Using CentreWare Internet Services
297
CentreWare Internet Services Settings
6
Configuring Machine Settings Using CentreWare Internet
Services
CentreWare Internet Services enables you to change various settings on the machine
from a computer.
Note • Confirm that the port in use is enabled in [Properties] tab > [Connectivity] > [Port Settings] of
CentreWare Internet Services when an item that you want to set is not displayed.
• If you change a setting from CentreWare Internet Services while the control panel is being
used, the change does not take effect until you manually reboot the machine. If [Auto Clear]
is set to [On], the changed items are displayed on the control panel after the machine
reboots. For information about Auto Clear, refer to "Auto Clear" (P.150).
• You may be prompted to enter your user name and passcode when you attempt to change
settings on CentreWare Internet Services. In that case, enter the system administrator's
user ID and passcode into the [User Name] and [Password] fields. The default user ID is
'"11111" and passcode is "x-admin".
You can configure the following settings with CentreWare Internet Services:
Note • For details on the setting items, click [Help] at the upper right corner of the CentreWare
Internet Services screen to see help.
To Next Page
Loading...
Need help?
General
