Alignment Adjustment Settings
619
Appendix
16
z
Perpendicularity adjustment
z
Skew adjustment
z
Scale adjustment
z
Print position adjustment
4) Save the adjusted values.
5) Assign the saved values to a tray.
Alignment Adjustment Settings
Save the adjustment results for perpendicularity, squareness, print position, and scale
as an alignment adjustment type, and then assign the type to a tray.
1 Load paper in a tray.
2 Press the <Log In/Out> button.
3 Enter the system administrator’s user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the system administrator’s
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
4 Select [Tools] on the [Services Home]
screen.
Note • When the [Services Home] screen is not
displayed on the touch screen, press the
<Services Home> button.
5 Select [System Settings] > [Common
Service Settings] > [Maintenance].
<Log In/Out> button
To Next Page
Loading...
Need help?
General
