Paper Jams
581
Problem Solving
15
Paper Jams at the Lever 2a and the Knob 3a when D2 Folder Unit is Installed
1 Make sure that the machine has stopped
before opening the right cover of the finisher.
2 Move the lever 2a and turn the knob 3a to
the left. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces
of paper inside the machine.
3 Return the lever 2a to the original position.
4 Close the finisher right cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
Paper Jams at the Lever 2b and the Knob 2c when D2 Folder Unit is Installed
1 Make sure that the machine has stopped
before opening the right cover of the finisher.
2 Move the levers 2b and turn the knob 3a to
the right. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces
of paper inside the machine.
To Next Page
Loading...
Need help?
General
