2 Paper and Other Media
58
Paper and Other Media
2
Changing the Paper Size
The following describes how to change the paper size for Trays 1 to 4 and 6.
Note • The paper types for Trays 1 to 4 and 6 are preset. Normally, plain paper is set. When
replacing the loaded paper with other types of paper, change the paper type settings to
match the type of paper to be loaded to maintain print quality. For information about
changing the paper types, refer to "Changing the Paper Settings" (P.65).
• For Trays 1 and 2, you can set a non-standard paper size. When setting a non-standard
paper size, you must register the paper size. For information about registering paper sizes,
refer to "Paper Tray Attributes" (P.155).
For information about paper size, refer to "Paper Size Settings" (P.174).
For information on how to copy on non-standard size paper, refer to "3 Copy" > "Copy" > "Paper
Supply (Selecting the Paper for Copying)" in the User Guide. For information on how to print on non-
standard size paper, refer to the print driver's online help.
Important • Do not load paper of mixed sizes together into a tray.
Changing the Paper Size for Trays 1 to 2
The following describes how to change the paper size for Trays 1 to 2.
1 Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do not pull the tray out that the job uses.
• Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper
jams or any other troubles. First, remove the remaining paper in the tray, and then load the
new stack of paper.
2 Remove any paper loaded in the tray.
3 Hold the long-side paper guide and slide it to
the desired paper size (1). Hold the short-
side paper guide on the right side and slide it
to the desired paper size (2).
CAUTION
Make sure to pull out the tray
slowly. When the tray is being
pulled out with force, the tray
may possibly hit your knees or
other parts of your body causing
injuries.
1
2
To Next Page
Loading...
Need help?
General
