5 Tools
286
Tools
5
If authentication fails, the print data sent to the machine is saved in the machine or deleted
according to the Charge Print settings.
îš„Feature Access
Set [Color Copying], [Print Files from Folder], and [Retrieve Files from Folder].
Create/View User Accounts
To enable the Accounting feature, register user IDs and user names to authenticate
registered users.
You can set a limit on the number of pages for each user of the machine. You can also
check the cumulative number of pages for each user registered. Up to 1,000 user data
can be registered. The settings described here are identical with [Create/View User
Accounts] under [Accounting].
Refer to "Create/View User Accounts" (P.274).
Reset User Accounts
You can delete all registered information for all registered users in a single operation,
or reset the auditron data. It is also available to print contents for confirmation before
resetting. The settings described here are identical with [Reset User Accounts] under
[Accounting].
Refer to "Reset User Accounts" (P.277).
Create Authorization Groups
System administrators can give login users authority to use some features that are
restricted for login users. The login users can be divided into different authorization
groups.
Note • Up to 20 groups can be registered.
1 Select [Create Authorization Groups].
2 Select [Group Name], and then select
[Create/Delete].
3 Select and set any item.
îš„Group Name
Enter a group name with up to 32 single-byte characters.
îš„Restrict Recipient Selection Method
Select whether or not to remove restriction when a transmission to a recipient who is not
registered on the Address Book is restricted for the Fax/Internet Fax or Scan feature.
îš„Restrict User to Edit Address Book
Select whether or not to remove restriction when the edit of the Address Book is restricted.
îš„Allow User to Disable Active Settings
Select whether or not to permit the group members to temporarily disable the forcible printing
features, such as the Force Watermark, Force Secure Watermark, Print Universal Unique ID,
and Force Annotation features, and to allow the machine to process a job.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
îš„When Protection Code is Detected
Select whether or not to temporarily allow the machine to process a job even if the machine
detects a protection code embedded in a document.
To Next Page
Loading...
Need help?
General
