Fuji Xerox ApeosPort-IV C7780 Administrator's Guide

Fax Service Settings
235
Tools
5
Mixed Size Originals Scan Mode
Set the scan mode when the machine scans documents of various sizes simultaneously with
the document feeder. If only documents of standard sizes are to be scanned, we recommend
that you select [Standard Size Mode].
Note • When [Standard Size Mode] is selected, image loss may occur if the following types of
documents are scanned:
- Non-standard size documents
- B4 size documents with the inch series setting in [Paper Size Settings].
Skip Blank Pages
Set whether or not to detect blank pages while scanning 2 sided documents and transmits
only pages that are not blank.
Note • This feature is for service representative use. For more information, contact our Customer
Support Center.
Fax Data in Folder Priority 1 to 3
Set the priority to display the fax information received using folders. For instance, when using
Network Scanner Utility 3, the fax information is displayed in the [Recipient] section of the file
list screen.
There are priority levels from 1 to 3. All priority can be set, however, if you want to display
only one priority level, make the settings of all priority levels the same.
Note • This feature is not available for some models. An optional component is required. For more
information, contact our Customer Support Center.
Direct Fax
Set whether or not to receive a fax, which is instructed using a fax driver from a computer.
When you select [Disabled], the Direct Fax feature becomes unavailable.
Block Inbound Faxes
Set a G3-ID (fax number) from which you want to reject a fax reception. You can specify up to
50 G3-IDs.
You can find the G3-ID of the sender that you want to reject in "Remote Station" column of an
Activity Report or "Input Source" column of a Job History Report.
Block Unknown Fax Numbers
Set whether or not to receive faxes from unknown G3-ID fax numbers. When [Yes] is
selected, the machine does not receive faxes from unknown fax numbers.
Fax Received Options
Fax Received Options allows you to specify a method for classifying received fax
documents into specified folders.
Folder Selector Setup
If you set the classification by line type, the machine classifies the received documents by line
type and store them in the folders specified.
1 Select [Folder Selector Setup].

Fuji Xerox ApeosPort-IV C7780 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV C7780
Category	All in One Printer
Language	English