16 Appendix
632
Appendix
16
10 Set [Booklet Fold State (15 Sheets)] in the
same way as [Booklet Fold State (2
Sheets)].
Note • Alignment is adjusted automatically when
loading stacks of 2 to 15 sheets.
Note • When loading stacks of other than 2 or 15
sheets, select [Variable-Sheet Booklet] to
adjust the alignment.
11 Select [Adjust].
12 Select [Sample Printout] again to print a sample printout, and check the adjustment
results.
13 Adjust the alignment again if necessary (steps 7 to 10).
14 Select [Save].
C Fold Position Adjustment
Adjust the C fold position.
1 Select [C Fold-A4] or [C Fold-8.5x11"], and
then select [Change Settings].
2 Select [Sample Printout].
3 Select the tray in which you loaded paper,
and press the <Start> button.
A sample printout is printed.
To Next Page
Loading...
