Fuji Xerox ApeosPort-IV C7780 Administrator's Guide

Loading Paper
55
Paper and Other Media
2
1 Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do
not pull the tray out that the job uses.
2 Slide the switches to the appropriate weight
setting.
3 Push the tray in gently until it comes to a stop.
Improving the Paper Feeding Performance in Tray 6 (HCF B1-S)
This section describes how to improve the paper feeding performance.
If images are skewed even when paper is loaded correctly, use the following procedure
to feed paper more accurately.
Important • If any of the following types of paper is loaded in the tray, performing the procedure in this
section may cause the paper to be fed improperly, resulting in paper jams.
1 Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do
not pull out the tray.
CAUTION
Make sure to pull out the tray slowly.
When the tray is being pulled out with
force, the tray may possibly hit your
knees or other parts of your body causing
injuries.
- Heavyweight
(221 gsm or more)
- HW Reload
(221 gsm or more)
- Hole Punched Heavyweight
(221 gsm or more)
- Gloss (106 gsm or more) - Gloss Reload
(106 gsm or more)
- Tab Stock
(221 gsm or more)
- Labels (106 gsm or more) - Transparency - Adhesive
CAUTION
Make sure to pull out the tray
slowly. When the tray is being
pulled out with force, the tray
may possibly hit your knees or
other parts of your body causing
injuries.
Weight
switches

Fuji Xerox ApeosPort-IV C7780 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV C7780
Category	All in One Printer
Language	English