15 Problem Solving
576
Problem Solving
15
4 Push the cover [1e] until it clicks into place,
and then close it.
Note • A message will be displayed and the
machine will not operate if the cover is
even slightly open.
Paper Jams at the Lever 1a and the Knob 1c
1 Make sure that the machine has stopped
before opening the left cover of the finisher.
2 Move the lever 1a downwards and turn the
knob 1c anti-clockwise. Remove the jammed
paper.
Note • If paper is torn, check for any torn pieces
of paper inside the machine.
3 Return the lever 1a to the original position.
4 Close the finisher left cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
To Next Page
Loading...
Need help?
General
