16 Appendix
612
Appendix
16
Printable Area
The area on paper that can be printed is as follows.
Standard Printable Area
The standard printable area is an area on paper excluding the 4 mm margins on all four
edges of paper. For 13
× 18" (320 mm width), the printable area is an area on paper
excluding the 3.5 mm left and right margins. The actual printable area, however, may
vary depending on the printer (plotter) control language.
Extended Printable Area
With the extended printable area setting, for printing, both the printable area and the
print assured area can be extended to 323
× 480 mm at a maximum. For copying, both
the printable area and the print assured area can be extended to 317
× 432 mm at a
maximum.
The un-printable area, however, may vary depending on the size of paper.
Note • To extend the print area, change the PCL print driver setting, or the [Print Area] setting on
the touch screen.
For the setting method on the print driver, refer to the help provided for the print driver. For more about
the setting on the control panel, refer to "Print Area" (P.217).
When the paper width is 12.6 inches
(320 mm width)
When the paper width is 330mm
(320 mm width)
Printing
4mm
3mm
4mm
3mm
Unprintable Area
Printable Area/
Print Assured Area
Paper feed direction
4mm
4mm
3.5mm
3.5mm
Printable Area
6.5mm
6.5mm
Unprintable Area
Print Assured Area
Paper feed direction
Copying
4mm
3mm
4mm
3mm
Unprintable Area
Printable Area/
Print Assured Area
Paper feed direction
4mm
16.5mm
52mm
16.5mm
Unprintable Area
Paper feed direction
Printable Area/
Print Assured Area
To Next Page
Loading...
