15 Problem Solving
566
Problem Solving
15
4 Return the levers 1d and 6 to the original position.
5 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
Paper Jams at the Levers 1a and 1b
1 Open the front cover of the finisher.
2 Move the lever 1a to the right.
3 Remove the jammed paper.
Note • If paper is torn, check for any torn pieces
of paper inside the machine.
4 If the paper cannot be removed, return the
lever 1a to the original position and move the
lever 1b to the right
.
To Next Page
Loading...
