EasyManuals Logo

Fuji Xerox ApeosPort-IV C7780 Administrator's Guide

Fuji Xerox ApeosPort-IV C7780
739 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
2 Paper and Other Media
52
Paper and Other Media
2
4 With the side to be copied or printed on
facing up, load the remaining paper and
align the edges of the paper in the arrow
direction (1). Hold the short-side paper guide
on the left side and slide it to the desired
paper size (2).
Important • Do not load paper exceeding the
maximum fill line. It may cause paper
jams or machine malfunctions.
• If the paper stack loaded in the tray is 100 sheets or less, the guides apply more pressure to
the paper stack. It may cause distortion of paper stack, and may cause paper jams.
• Position the guides correctly to match the paper size. Otherwise, paper may not be fed
properly and cause paper jams.
5 Push the tray in gently until it comes to a stop.
Loading Tab Paper in Tray 6 (HCF B1-S)
The following describes the procedure for loading tab paper in Trays 6 (HCF B1-S).
Important • Tab paper can be used only for [Tab Margin Shift] and [Covers/Separators].
Note • Be sure to fan the paper well. Otherwise, paper may cause paper jams, and multiple sheets
may be fed to the machine at once.
For information about changing the paper size and orientation, refer to "Changing the Paper Size for
Tray 6 (HCF B1-S)" (P.63).
When heavyweight paper is loaded in the tray, be sure to adjust the position of the weight switch
buttons. For more information, refer to "Facilitating Feeding of Heavyweight Paper Loaded in Tray 6
(HCF B1-S)" (P.54).
1 Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do not pull the tray out that the job uses.
Note • To prevent paper jams or misloading, do not load new paper into the tray until the tray is
empty. Remove any paper remaining in the tray and then load the paper on newly loaded
paper.
2 Remove any paper loaded in the tray.
3 With the side to be copied or printed on
facing up, load approximately 50 to 100
sheets of paper in the tray and align the
edges of the paper in the arrow direction (1).
Hold the long-side paper guide and slide it to
the desired paper size (2).
Important • When loading tab paper, position the side
with the tab facing the left short-side
paper guide.
CAUTION
Make sure to pull out the tray
slowly. When the tray is being
pulled out with force, the tray
may possibly hit your knees or
other parts of your body causing
injuries.

Table of Contents

Other manuals for Fuji Xerox ApeosPort-IV C7780

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-IV C7780 and is the answer not in the manual?

Fuji Xerox ApeosPort-IV C7780 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-IV C7780
CategoryAll in One Printer
LanguageEnglish

Related product manuals