15 Problem Solving
580
Problem Solving
15
3 Return the lever 3g to the original position.
4 Close the finisher right cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
Paper Jams at the Lever 4b and the Knob 3a
1 Make sure that the machine has stopped
before opening the right cover of the finisher.
2 Move the levers 4b and turn the knob 3a to
the right. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces
of paper inside the machine.
3 Return the lever 4b to the original position.
4 Close the finisher right cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
To Next Page
Loading...
Need help?
General
