15 Problem Solving
578
Problem Solving
15
3 Return the lever 1b to the original position.
4 Close the finisher left cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
Paper Jams at the Lever 3b and 3d
1 Make sure that the machine has stopped
before opening the right cover of the finisher.
2 Move the levers 3b and 3d, and remove the
jammed paper.
Note • If paper is torn, check for any torn pieces
of paper inside the machine.
3 Return the lever 3b and 3d to the original
position.
4 Close the finisher right cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
To Next Page
Loading...
