5 Tools
212
Tools
5
z
Internet faxes other than the Internet fax sent by S/MIME when [S/MIME Communication] is
set to [Enabled].
z
Internet faxes that fail to attach a signature or verification.
z
Internet faxes that are attached with an expired certificate.
îš„Message Digest Algorithm
Select a message digest algorithm. Select from [SHA1] and [MD5].
îš„Message Encryption Method
Set the encryption method for mail contents. Select from [3DES], [RC2-40], [RC2-64], and
[RC2-128].
îš„Split Encrypted E-mail
Select whether or not to split an outgoing encrypted e-mail for each recipient.
îš„Split Encrypted Internet Fax
Select whether or not to split an outgoing encrypted Internet fax for each recipient.
îš„Digital Signature - Outgoing E-mail
Select whether or not to always add a digital signature to outgoing e-mails. You can also
select the setting in which the machine asks to add a digital signature to the e-mail whenever
you send.
îš„Signing Certificate for E-mail Attachment
Select the certificate to use for attaching a signature to e-mails.
îš„Digital Signature - Outgoing Internet Fax
Select whether or not to always add a digital signature to outgoing Internet faxes. You can
also select the setting in which the machine asks to add a digital signature to the Internet fax
whenever you send.
îš„Certificate Auto Store
Select whether or not to automatically store an S/MIME certificate attached with the e-mail
when receiving e-mail from an address registered on the Address Book.
PDF/DocuWorks/XPS Signature Settings (ApeosPort Series Models Only)
Configure signature settings of PDF/DocuWorks/XPS documents.
îš„Device Certificate
Select a certificate to use for the signature.
For more information on the certificate, refer to "Encryption and Digital Signature Settings" (P.367).
îš„PDF Signature
Select the setting for PDF Signature from [Do not add signature], [Always add visible
signature], [Always add invisible signature], or [Select during send].
îš„DocuWorks Signature
Select the setting for DocuWorks Signature from [Do not add signature], [Always add
signature], or [Select during send].
îš„XPS Signature
Select the setting for XPS Signature from [Do not add signature], [Always add invisible
signature], or [Select during send].
IPSec Settings
Configure the IPSec settings.
Note • For [IKE Authentication Method], [Preshared Key], [DH Group], and [PFS Settings], consult
your network administrator.
îš„IKE Authentication Method
Set the IKE authentication method. Select from [Authenticate by Preshared Key] and
[Authenticate by Digital Signature].
To Next Page
Loading...
Need help?
General
